TM-9-2350-277-10 Operator Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 671 of 868
TM 9-2350-277-10 WARNING Always wear eye protection when using a hammer. Eye injury may result if metal chips contact eyes. 4. Tighten each track fixture an equal amount to line up track pin holes. Tap long end of drive pin punch through track pin holes to other side of track. Wear industrial goggles and use hammer. Tighten track fixture as needed to obtain 20 degree angle between shoes to be connected. Use 1-5/16 inch open end wrench. WARNING Always wear eye protection when using a hammer. Eye injury may result if metal chips contact eyes. 5. From inside of track, install track pin in track pin hole. As helper aligns track pin holes with crowbar, lightly tap in track pin. Drive track pin all the way through track. Wear industrial goggles and use hammer. 0092 00-7 Change 2 BREAK/JOIN (T130) TRACK — Continued 0092 00