TM-9-2350-277-10 Operator Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 535 of 868
TM 9-2350-277-10 PREVENTIVE MAINTENANCE CHECKS AND SERVICES — Continued 0090 00 NOTE For location of nearest AOAP Laboratory and complete informationabout AOAP, refer to TB 43-0210. Preservation Oil If engine/transmission has been filled with preservation engine oil, leave this oil in engine/transmission until first scheduled oil change. Maintain operating oil level by adding applicable grade oil (OE/HDO or OEA). When first scheduled oil change is due, notify unit maintenance to refill engine/transmission with applicable grade of oil. See Lubrication Tables below. Lubrication Tables The following tables provide lubrication data for the PMCS lubrication checks. LUBRICANT SYMBOLS SYMBOL NOMENCLATURE SPECIFICATION DF Diesel Fuel VV-F-800 FRH Hydraulic Fluid, Rust Inhibited, Fire Resistant MIL-H-46170 GAA Grease, Automotive and Artillery MIL-G-10924 Grease, Wire Rope and Exposed Gear MIL-G-18458 OE/HDO Lubricating Oil, Internal Combustion Engine MIL-L-2104D OEA Lubricating Oil, Internal Combustion Engine MIL-L-46167 PE Preservation Oil MIL-L-21260 PL-M Lubricating Oil, General Purpose (Medium) MIL-L-3150 PL-S Lubricating Oil, General Purpose (Special) VV-L-800 LUBRICANT USAGE LUBRICANTS TO USE AT EXPECTED TEMPERATURES* COMPONENTS CAPACITIES (APPROX) Above +32 F (Above 0 C) +40 F to -10 F (+5 C to -23 C) 0 F to -65 F (-18 C to -54 C) INTERVALS OE/HDO-15/40 OE/HDO-15/40 OEA Daily — Check and Fill On Condition — Sample Engine 18 qts PE-30-1 PE-30-1 Leave in engine until first scheduled oil change Fuel System 100 gal DF-2 DF-1 DF-A Daily — Drain filters 0090 00-7 Change 3