TM-9-2350-277-10 Operator Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 311 of 868
TM 9-2350-277-10 OPERATE AN/VVS-2(V)1A DRIVER’S NIGHT VISION (ALL EXCEPT M58) — Continued 0035 00 OPERATE DRIVER’S NIGHT VISION WITH 2.7 VOLT BATTERY 1. Remove entrance window cover and eyepiece protective cap. 2. Return eyepiece protective cap and entrance window cover to stowage bracket. STOWAGE BRACKET ENTRANCE WINDOW COVER DRIVER’S NIGHT VISION STRAP ASSEMBLY STOWAGE COVER 3. Remove driver’s night vision power cable from driver’s night vision. 4. Connect driver’s night vision power cable to stowage receptacle on master switch panel. 5. Install power cable receptacle cap on driver’s night vision. 6. Remove battery compartment cap and insert 2.7 volt battery with recessed end (+) first into battery compartment. STOWAGE RECEPTACLE NIGHT VISION POWER CABLE NOTE The recessed end of the 2.7 volt battery is the positive end (+). Finger-tighten battery compartment cap securely to ensure firm contact with battery. 7. Finger tighten battery compartment cap securely to ensure firm contact with 2.7 volt battery. 8. Adjust driver’s seat for comfortable viewing at eyepiece. 0035 00-5 Change 3