TM-9-2350-277-10 Operator Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download

TM 9-2350-277-10 OPERATE AN/VVS-2(V)1A DRIVER’S NIGHT VISION (ALL EXCEPT M58) — Continued 0035 00 8. Rotate OFF/BRIGHT rotary switch to maximum clockwise bright (ON) position and note that a green image is visible in the eyepiece. OFF ON DNV POWER SWITCH LEVEL TRANS FILTER TRANS OIL PARKING HEADLIGHTS CLOGGED LOW PRESS BRAKE HI BEAM MASTER SWITCH ON TEMP F RIGHT FUEL TANK LEFT START IR-BO SELECT OFF ON I.R. B.O. BATT GEN INDICATOR RPM HUNDREDS 160 200 120 240 10 20 30 40 50 60 E F 1/4 1/2 3/4 20 25 30 15 10 5 O 40 35 BILGE PUMPS OFF ON MARKER LIGHT UNLOCK BO STOP SER PANEL BRIGHT DIM DRIVE PARK 0 0 0 0 0 0 MI L E S PE R H O U R B A T T G EN ER A T O R TH DRI HOUR 10 OFF ON BILGE PUMPS ON DRIVERS FAN WAIT GLOW PLUG D.N.V. POWER SELECT SWITCH DRIVING LIGHTS SWITCH NOTE The OFF/BRIGHT rotary switch normally is set to maximum clockwise bright (ON) position when viewing dim images. However, if the image display is too bright, contrast will be degraded. Therefore, adjust brightness for best contrast. 9. Set driver’s night vision in straight-ahead (detent) position for normal driving. 10. When slowly turning carrier or when turning it from a stopped position, driver’s night vision can be rotated out of detent position by twisting it firmly. 11. If operator normally wears reading glasses, use them while operating driver’s night vision, because image appears 20 inches away which is normal reading distance. 12. If light outside increases, reinstall entrance window protective cover. C A U T I O N Do not open driver’s hatch with vision power connected. The driver’s night vision power cable is not long enough. NOTE Before cleaning entrance window with lens tissue and lens cleaner, gently remove excess dirt and dust from entrance window. 13. If entrance window becomes rain spotted or dusty, maintain good visibility by first removing driver’s night vision from carrier mount. 14. Clean entrance window with lens tissue folded into a swab and moistened with lens cleaner, using circular motion. 15. Dry entrance window with a clean dry lens tissue, using circular motion. 16. Move driving lights switch to OFF. 17. Move DNV POWER switch to OFF. 0035 00-3 Change 3