TM-9-2350-277-10 Operator Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 306 of 868
TM 9-2350-277-10 INSTALL/REMOVE AN/VVS-2(V)1A DRIVER’S NIGHT VISION (ALL EXCEPT M58) — Continued 0034 00 4. Stow excess cable behind fixed fire extinguisher tubing. 5. Rotate driver’s night vision to straight-ahead (detent) position. 6. Hold driver’s night vision firmly, while loosening two viewer handles, slide rear cleat back. FORWARD CLEATS VIEWER HANDLES REAR CLEAT HANDLE REAR CLEAT 7. Tilt the eyepiece end forward and carefully lower driver’s night vision. 8. Carefully wipe off any dirt or moisture from driver’s night vision. 9. Remove strap assembly, plug, stowage cover, and entrance window cover from stowage bracket. 10. Install driver’s vision in stowage bracket and secure with strap assembly stowage cover and entrance window cover. 11. Install plug assembly in vision adapter mount and secure with rear cleat and two viewer handles. STOWAGE BRACKET ENTRANCE WINDOW COVER DRIVER’S NIGHT VISION STRAP ASSEMBLY STOWAGE COVER END OF TASK 0034 00-6 Change 3