Sign up to sell your inventory with NSN Lookup

TM-9-2350-277-10 Operator Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download

Page 302 of 868

TM 9-2350-277-10 INSTALL/REMOVE AN/VVS-2(V)1A DRIVER’S NIGHT VISION (ALL EXCEPT M58) — Continued 0034 00 2. Loosen two viewer handles on viewer adapter mount and slide rear cleat by pulling back handle. Tilt plug assembly to remove from viewer adapter mount in hatch. 3. Stow plug in Basic Issue Items bag. Stow bag in a suitable place in the vehicle. 4. Install strap assembly, stowage cover, and entrance window cover on stowage bracket. FORWARD CLEATS VIEWER HANDLES REAR CLEAT HANDLE REAR CLEAT 5. Check to see that driver’s night vision is in center detent position so that mount assembly is square with the side of the entrance window housing. If not, rotate it in its mount until it stops in center detent position. 6. Hold driver’s night vision in an upright position with the window pointing forward and then push entrance window carefully through viewer adapter mount in hatch. 0034 00-2 Change 3