TM-9-2350-277-10 Operator Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download

TM 9-2350-277-10 START ENGINE — Continued 0021 00 C A U T I O N Do not engage START switch for more than five seconds at a time. Do not move engine throttle. NOTE If engine START switch is not pushed within oneminute after glow plug WAIT indicator begins flashing, glow plug WAIT indicator will go off. 20. Push START switch and hold until engine starts, but no longer than five seconds at a time. LEVEL TRANS FILTER TRANS OIL PARKING HEADLIGHTS CLOGGED LOW PRESS BRAKE HI BEAM MASTER SWITCH ON TEMP F RIGHT FUEL TANK LEFT START IR-BO SELECT OFF ON I.R. B.O. BATT GEN INDICATOR RPM HUNDREDS 160 200 120 240 10 20 30 40 50 60 E F 1/4 1/2 3/4 20 25 30 15 10 5 O 40 35 BILGE PUMPS OFF ON MARKER LIGHT UNLOCK BO STOP SER PANEL BRIGHT DIM DRIVE PARK 0 0 0 0 0 0 M I L E S P E R H O U R B A T T G E N E R A T O R TH DRI HOUR 10 OFF ON BILGE PUMPS ON DRIVERS FAN WAIT GLOW PLUG D.N.V. POWER START SWITCH GLOW PLUG OR AIR BOX HEATER SWITCH 21. If engine does not start on first attempt, wait 10 seconds and try again. C A U T I O N If engine fails to start after four attempts, or when glow plug WAIT indicator goes out, stop start procedure. 22. Repeat Step 21 two more times if necessary. If engine still has not started, notify unit maintenance. NOTE After engine starts, WAIT indicator will stop flashing and stay on steady for one minute after START switch is released. 23. After engine starts, slowly increase engine speed until engine has reached a minimum speed of 1200 RPM. Do not exceed 1800 RPM. 0021 00-14 Change 2