TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 633 of 788
REPAIR POWER CONTROL ENCLOSURE, RIGHT PANEL (M1068 ONLY) — Continued 15. Remove all wiring from terminal blocks (6) by loosening all set screws. Remove four screws (7), locknuts (8), eight washers (9), and two terminal blocks (6) from enclosure (5). Discard locknuts. ASSEMBLY 0083 00-5 ASSEMBLY 1. Install two terminal blocks (6), four screws (7), new locknuts (8), and eight washers (9) on enclosure (5). Use wiring diagram (page 0083 00-9). Install all wiring to terminal blocks and secure all set screws. 0083 00 TM 9-2350-261-34