TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 613 of 788
REPLACE/REPAIR INVERTER AND INVERTER HOUSING ASSEMBLY A2 (M1068 ONLY) — Continued NOTE Before installation of inverters IN1 and IN2, shut POWER switches OFF. The cascade remote harness W15 will control inverters. Installation for inverters IN1 and IN2 are different. Follow schematic for proper wiring connections. 7. Connect two cable W15 connectors (19) to inverter IN1 (20) and inverter IN2 (21). 8. Install blackout curtain (17) on inverter housing (18) and secure with six washers (16), three screws (14), and new locknuts (15). 9. Install two ground leads E5 (13) on carrier wall and secure with new lockwasher (12) and screw (9). 10. Install ground lead W432 (11) and ground lead W632 (10) on carrier wall and secure with new lockwasher (12) and screw (9). 11. Connect cable W6 (6) and two leads E4 (7) on terminal block TB1 (8) and secure with two set screws (5). 12. Connect cable W5 (3) and six leads (2) on terminal block TB2 (4) and secure with ten screws (1). 0079 00-5 0079 00 TM 9-2350-261-34