TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 590 of 788
TM 9-2350-261-34 INSTALL CARGO HATCH ARMOR SHIELDS (M113A2 ONLY) — Continued 0075 00 9. If holes are already in carrier, remove and discard six 1/2 inch (13 mm) screws and washers, two 5/8 inch (16 mm) screws and washers, and four 3/8 inch (10 mm) screws and washers. 10. If pintle socket plate mounting holes are not drilled and tapped in cargo cover and on inside rear hull plate, go to Step 11. If these holes have been drilled and tapped, go to Step 13. 11. Measure center point for four holes as shown below. Two holes are on cargo cover. Two holes are on inside rear hull plate. 0075 00-4