TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 589 of 788
TM 9-2350-261-34 INSTALL CARGO HATCH ARMOR SHIELDS (M113A2 ONLY) — Continued 0075 00 NOTE All dimensions are in inches with metric equivalents. 6. Measure center points for 12 holes as shown below, six holes on each side of top deck. 7. Drill holes to a maximum depth of 1-1/4 inch (3 cm) using drill sizes as shown below. 8. Tap six holes (rear) to 1/2-13 UNC-2B, two holes (middle) to 5/8-11 UNC-2B, and four holes (front) to 3/8-16 UNC-2B. Tap all holes to 7/8 inch (22 mm) minimum depth. 0075 00-3