TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 575 of 788
TM 9-2350-261-34 INSTALL ANCHOR KIT (M113A2 AND M1059 ONLY) — Continued 0073 00 3. Measure and mark the center points for holes, using the dimensions given below. 4. Drill and tap the ten holes marked in Step 3. Tap holes to 1/2-13 UNC-2B, 1 inch (3 cm) minimum full thread depth. 0073 00-3
