TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 570 of 788
TM 9-2350-261-34 INSTALL CAPSTAN KIT (M113A2 AND M1059 ONLY) — Continued 0072 00 8. Make sure retainer (5) is installed in drum (6) with pin (7). 9. Install drum (6) on adapter (3). Secure with retainer (5). 10. Measure and mark the correct positions for the smaller stowage support (1) and for the larger support (2) on top of carrier. NOTE All weld sizes are minimum. Do not exceed 1/16 inch (2 mm) over specified sizes. 11. Remove all paint, alodine, and debris from surfaces under stowage supports to be welded. 12. Weld stowage supports (1) and (2) to top plate of carrier as marked in Step 10 in accordance with TC 9-237. Use electrode type 5356. 0072 00-4