TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 557 of 788
TM 9-2350-261-34 REPAIR TENT (M577A2 AND M1068 ONLY) — Continued 0071 00 NOTE A hole or tear in the tent more than 4-3/4 inches (12 cm) in diameter or length may be repaired by a cement patch. The tear must not occur on seams, edges, or areas that support hardware. The materials used to make a cement patch are adhesive, round patches, roller, board, wire brush, and soft bristled brush. For cement patch repair, do Steps 2 - 9. 2. Select one of three sizes of patches that will overlap damaged area with a margin of at least 3/4 inch (19 cm) on all sides. 3. Place board under damaged area for a flat working surface. 4. Buff patch and damaged area of tent with a wire brush. 0071 00-3