TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 540 of 788
TM 9-2350-261-34 REPLACE BLOWER MOTOR — Continued 0068 00 6. Remove seven screws (10), speed nuts (11), and cover (12) from blower plate (13). 7. Loosen set screw (14) and remove fan vane (15) from motor (16). 8. Remove three screws (17), spacers (18), grommets (19), and motor (16) from blower plate (13). INSTALLATION 1. Install motor (16) in blower plate (13). Secure with three screws (17), spacers (18), and grommets (19). 2. Place fan vane (15) flush with end of motor shaft. Secure with set screw (14). 3. Install cover (12) on blower plate (13). Secure with seven screws (10) and speed nuts (11). Turn fan vane (15) through combustion tube opening to make sure fan vane is clear. 0068 00-2