TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 517 of 788
TM 9-2350-261-34 REPLACE FUEL CONTROL VALVE — Continued 0062 00 FUEL FLOW TEST 1. Connect fuel control valve to coolant heater fuel hose. Fuel pressure must be 3 to 15 psi (21 to 103 kPa) when fuel valve is open. 2. Place fuel control valve outlet over calibrated and overflow containers. 3. Make sure the body of fuel valve is grounded. 4. Energize fuel valve solenoids. Connect two solenoid leads to a 24 V dc power source. Solenoids are now open for high heat fuel flow. 0062 00-3