TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 498 of 788
TM 9-2350-261-34 INSTALL ENGINE COOLANT HEATER KIT (M1064 ONLY) — Continued 0061 00 36. Install tee (1) in coolant heater (8). 37. Install bushing (2) in tee (1). 38. Install elbow (3) in bushing (2). 39. Install bushing (4) in tee (1). 40. Install shutoff cock (5) in bushing (4). 41. Install hose (9) on elbow (3). Secure with clamp (10). 42. Remove two screws (11), washers (12), plate (13), and gasket (14) from engine block right side. Discard plate and gasket. 43. Install elbow (6) and draincock (7) in mount (15). 44. Apply a thin coat of sealing compound (WP 0105 00, Item 18) to both sides of gasket (16) before assembly. 45. Install mount (15) and gasket (16) on engine block opening. Secure with two screws (11) and washers (12). 46. Install hose (17) on elbow (6). Secure with clamp (18). 0061 00-8