TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 493 of 788
TM 9-2350-261-34 INSTALL ENGINE COOLANT HEATER KIT (M1064 ONLY) — Continued 0061 00 10. Clean external pipe threads of tee (1), bushing (2), shutoff cock (3), bushing (4), elbow (5), and elbow (6) with solvent, cleaning compound. WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. 11. Apply a thin, even coat of primer and then sealing compound (WP 0105 00, Item 17) to cleaned external pipe threads of tee (1), bushing (2), shutoff cock (3), bushing (4), and two elbows (5) and (6). Do not apply primer or sealing compound beyond small end of threads. 12. Install tee (1) in coolant heater (7). 13. Install bushing (2) in tee (1). 14. Install shutoff cock (3) in bushing (2). 15. Install bushing (4) in tee (1). 16. Install elbow (5) in bushing (4). 17. Install elbow (6) in coolant heater (7). 18. Install hose (8) on elbow (9) and elbow (6) with two clamps (10). 0061 00-3