TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 490 of 788
TM 9-2350-261-34 INSTALL ENGINE COOLANT HEATER KIT (M577A2 AND M1068 ONLY) — Continued 0060 00 FOLLOW-THROUGH STEPS 1. Install personnel heater (see your -20). 2. Lower power plant grille (see your -20). 3. Fill carrier cooling system (see your -20). 4. Fill coolant heater cooling system (see your -20). 5. Connect battery ground lead (see your -20). 6. Bleed coolant heater fuel line (see your -20). 7. Start coolant heater (see your -10). Check for leaks and that heater operates properly. Turn heater off. 8. Install rear and right front floor plates (see your -20). 9. Install driver’s power plant access panel (see your -20). 10. Install power plant rear access panel (see your -20). 11. Close power plant front access door and raise trim vane (see your -10). 12. Raise and lock ramp (see your -10). 13. Stop engine (see your -10). 14. Install generator set (see your -10) or 5.0 KW APU (see your -20). END OF TASK 0060 00-28