TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 486 of 788
TM 9-2350-261-34 INSTALL ENGINE COOLANT HEATER KIT (M577A2 AND M1068 ONLY) — Continued 0060 00 118. Remove four screws (13), washers (14), and plate (15) from driver’s compartment bulkhead. Discard plate. 119. Thread terminal ground lead (16), coolant heater connector (17), and wiring harness (18) through new wiring harness plate (19) and driver’s compartment bulkhead opening. 120. Install wiring harness plate (19) on driver’s compartment bulkhead. Secure with four screws (13) and washers (14). 121. Connect coolant heater connector (17) of wiring harness (18) to coolant heater receptacle (20). 122. Install wiring harness (18) and terminal ground lead (16) on mounting bracket (21). Secure with two screws (22), nuts (23), clamps (24), and lockwashers (25). 123. Connect control box connector (11) of wiring harness (12) to control box receptacle (13). 124. Connect main wiring harness circuit 400C lead (14) to coolant heater wiring harness lead (15). 125. Install wiring harness (12) on front main wiring harness (16). Secure with eight straps (17). 0060 00-24