TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 482 of 788
TM 9-2350-261-34 INSTALL ENGINE COOLANT HEATER KIT (M577A2 AND M1068 ONLY) — Continued 0060 00 104. Clean external pipe threads of elbow (1) with solvent, cleaning compound. WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. 105. Apply a thin, even coat of primer and then sealing compound (WP 0105 00, Item 17) to cleaned external pipe threads of elbow (1). Do not apply primer or sealing compound beyond small end of threads. 106. Install elbow (1) in transverse beam (2). Secure with nut (3). 107. Install fuel hose (4) in control valve elbow (5). Secure with sleeve (7) and nut (8). 0060 00-20