TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 478 of 788
TM 9-2350-261-34 INSTALL ENGINE COOLANT HEATER KIT (M577A2 AND M1068 ONLY) — Continued 0060 00 75. Clean external pipe threads of all fittings with solvent, cleaning compound. WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. 76. Apply a thin, even coat of primer and then sealing compound (WP 0105 00, Item 17) to cleaned external pipe threads of all fittings. Do not apply primer or sealing compound beyond small end of threads. 77. Install adapter body (1) on coolant heater fuel pump (2). 78. Install fuel hose (3) in adapter body (1). Secure with sleeve (4) and nut (5). 79. Install elbow (6) on coolant heater fuel pump (2). 80. Install fuel hose (7) in elbow (6). Secure with sleeve (8) and nut (9). NOTE Parts (10) through (17) are already installed if the electronic equipment heater has been installed. 81. Disconnect fuel hose (10) from adapter body (11) on personnel heater fuel pump (12). 82. Remove and retain adapter body (11) from personnel heater fuel pump (12). 83. Install adapter body (13) on personnel heater fuel pump (12). 84. Secure elbow (14) to adapter (13). 0060 00-16