TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 467 of 788
TM 9-2350-261-34 INSTALL ENGINE COOLANT HEATER KIT (M577A2 AND M1068 ONLY) — Continued 0060 00 18. Install hose (8) on elbow (9) and elbow (6). Secure with two clamps (10). 19. Remove four screws (1), washers (2), and plate (3) from power plant compartment wall. Discard plate. 20. Install exhaust pipe (4) on lower elbow (5) and upper elbow (6). Secure with two clamps (7). Do not tighten clamps. 21. Install lower elbow (5) in coolant heater (8). Secure with clamp (7). Do not tighten clamp. 22. Install upper elbow (6) and gasket (9) on power plant compartment wall. Secure with four screws (1) and washers (2). 23. Tighten three clamps (7). 0060 00-5