Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download

Page 464 of 788

TM 9-2350-261-34 INSTALL ENGINE COOLANT HEATER KIT (M577A2 AND M1068 ONLY) — Continued 0060 00 INSTALLATION 1. Install mounting bracket (1) on right front sponson. Secure with four screws (2), washers (3), and lockwashers (4). 2. Install coolant pump (5) and ground lead (6) for wiring harness (7) on mounting bracket (1). Secure with clamp (8), two screws (9), three washers (10), one lockwasher (11), and two nuts (12). 3. Clean external tapered pipe threads of bushing (1), shutoff cock (2), elbow (3), and elbow (4) with solvent, cleaning compound. WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. 0060 00-2