TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 460 of 788
TM 9-2350-261-34 INSTALL ENGINE COOLANT HEATER KIT (M113A2, M901A1, AND M1059 ONLY) — Continued 0059 00 108. Install wiring harness (1) on two weldnuts (2). Secure with two clamps (3) and screws (4). 109. Remove three screws (5) and clamps (6) that secure fuel control cable (7) to three weldnuts (8). 110. Install wiring harness (1) and fuel control cable (7) on three weldnuts (8). Secure with three screws (5), clamps (6), and clamps (9). 111. Lower power plant grille assembly (see your -20). 112. Remove four screws (10), washers (11), and plate from grille. Discard plate. 113. Install upper tube (12) on exhaust pipe (13). Secure with clamp (14). Do not tighten. 114. Position upper tube (12) and gasket (15) on grille. 115. Secure upper tube (12) to grille with four screws (10) and washers (11). 0059 00-26