Sign up to sell your inventory with NSN Lookup

TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download

Page 458 of 788

TM 9-2350-261-34 INSTALL ENGINE COOLANT HEATER KIT (M113A2, M901A1, AND M1059 ONLY) — Continued 0059 00 100. Remove two screws (4) and control panel (5) from control box case (6). 101. Remove and discard two screws, nuts, and washers supplied with control box case (6). 102. Install control box case (6) on hull bracket (7). Secure with two screws (8). 103. Install control panel (5) to control box case (6). Secure with two screws (4). 104. Connect circuit 400A lead (9) to control box lead (10). 105. Connect control box connector (11) of wiring harness (12) to control box receptacle (13). 106. Connect main wiring harness 402A lead (14) to coolant heater wiring harness lead (15). Secure wiring harness (12) to front main wiring harness (16) with eight straps (17). 0059 00-24