TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 449 of 788
TM 9-2350-261-34 INSTALL ENGINE COOLANT HEATER KIT (M113A2, M901A1, AND M1059 ONLY) — Continued 0059 00 69. Connect coolant pump hose (14) and engine hose (15) to heat exchanger (11). Hoses must go through grommets (13). 70. Pull two hoses (14) and (15) through two grommets (13) in personnel compartment until hoses reach battery box (7). 71. Install two insulation tubes (16) on two hoses (14) and (15) at rear of power plant compartment. 72. On M113A2 only, install two hoses (1) and (2) through four brackets (3) on right sponson. 0059 00-15