TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 440 of 788
TM 9-2350-261-34 INSTALL ENGINE COOLANT HEATER KIT (M113A2, M901A1, AND M1059 ONLY) — Continued 0059 00 23. Remove two screws (15), two washers (16), plate (17), and gasket (18) from engine right side. Discard plate and gasket. 24. Install elbow (19) and drain cock (20) in mount (21). WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. 25. Apply a thin coat of sealing compound (WP 0105 00, Item 18) to both sides of gasket (22) before assembly. 26. Install mount (21) and gasket (22) on engine right side opening. Secure with two screws (15) and washers (16). 27. Install hose (23) on elbow (19). Secure with clamp (24). 0059 00-6