TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 427 of 788
TM 9-2350-261-34 INSTALL ELECTRONIC EQUIPMENT HEATER KIT (M577A2 ONLY) — Continued 0058 00 59. Remove two screws (3). Remove panel (4) from heater control box case (5). 60. Remove and discard two nuts furnished with control box case (5). Retain two lockwashers (6) and screws (7). 61. Place control box case (5) on bracket (8). Secure with retained screws (7), retained washers (6), and new nuts (9). 62. Place panel (4) in case (5). Secure with two screws (3). 63. Connect wiring harness (10) to connector on control box panel (4). 64. Install shell (11) and washer (12) on pin contact of heater control box lead (13). 65. Connect circuit 400A lead (14) to control box lead (13). 0058 00-15