TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 424 of 788
TM 9-2350-261-34 INSTALL ELECTRONIC EQUIPMENT HEATER KIT (M577A2 ONLY) — Continued 0058 00 WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. 48. Apply a thin, even coat of primer and then sealing compound to external pipe threads of engine bulkhead elbow (1) and transverse beam nipple (2). Do not apply primer or sealing compound beyond small end of threads. 49. Secure elbow (1) to power plant bulkhead with nut (3). 50. Install sleeve (4) and nut (5) on heater fuel inlet hose (6). 51. Connect fuel inlet hose (6) to elbow (1). 52. Disassemble bulkhead side of beam nipple (2). Install nipple in transverse engine compartment beam with nut (7). 53. Install sleeves (8) and (9) and nuts (10) and (11) on fuel hose (12). 54. Connect fuel hose (12) to elbow (1) and beam nipple (2). 0058 00-12