TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 420 of 788
TM 9-2350-261-34 INSTALL ELECTRONIC EQUIPMENT HEATER KIT (M577A2 ONLY) — Continued 0058 00 WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. 23. Apply a thin, even coat of primer and then sealing compound to external pipe threads of nipples (3) and (4), tee (5), plug (6), shutoff cock (7), and elbow (8). Do not apply primer or sealing compound beyond small end of threads. 24. Remove tube adapter (9) from fuel pump (2). Install adapter on fuel tube tee (5). 25. Connect flexible hose (1) to adapter (9). 26. Install plug (6) and nipple (3) in tee (5). 27. Install nipple (4) in tee (10) and cock (7). 28. Install tee (10) on nipple (3). 29. Install adapter (11) on cock (7). 30. Install coupler (12) in fuel pump (2). 31. Install elbow (8) in coupler (12). 32. Connect hose (13) between elbow (8) and adapter (11). 33. Install bracket (14) on hull bracket (15). Secure with two screws (16) and nuts (17). 0058 00-8