TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 415 of 788
TM 9-2350-261-34 INSTALL ELECTRONIC EQUIPMENT HEATER KIT (M577A2 ONLY) — Continued 0058 00 8. Install inlet nipple (1), elbow (3), and adapter (2) in heater assembly. 9. Install sleeve (4) and nut (5) on heater fuel inlet hose (6). 10. Connect fuel inlet hose (6) to adapter (2) on heater assembly (7). NOTE Before you secure heater assembly clamps, make sure there is at least 1 inch (3 cm) clearance between hull side wall and rear of heater assembly. 11. Place heater assembly (7) in clamps (8). Tighten clamps (8). 0058 00-3