TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 413 of 788
TM 9-2350-261-34 INSTALL ELECTRONIC EQUIPMENT HEATER KIT (M577A2 ONLY) 0058 00 THIS WORK PACKAGE COVERS: Installation (page 0058 00-1). INITIAL SETUP: M a i n t e n a n c e L e v e l Direct Support T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0104 00, Item 19) M a t e r i a l s / P a r t s Adhesive silicone sealant (WP 0105 00, Item 3) Sealing compound (WP 0105 00, Item 17) Sealing compound primer (WP 0105 00, Item 21) Silicone compound (WP 0105 00, Item 22) Solvent, cleaning compound (WP 0105 00, Item 10) P e r s o n n e l R e q u i r e d Track Vehicle Repairer 63H10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Ramp lowered (see your -10) Battery ground lead disconnected (see your -20) Floor plates removed (see your -20) Carrier fuel shutoff valve closed (see your -10) INSTALLATION NOTE This kit can not be installed if the 5.0 KW APU is installed. 1. Nut (1) is located on longest support link (2). If nut is on inside of radio mount platform (3), remove nut and screw (4). Install screw from inside of platform and nut on outside of link. 0058 00-1