TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 41 of 788
TM 9-2350-261-34 INTRODUCTION HOW TO USE TROUBLESHOOTING — Continued 0005 00 Check title to make sure you are troubleshooting the correct system or component for the problem. Next, read the INITIAL SETUP carefully. Make sure you have all the items listed in INITIAL SETUP. Some access steps in Equipment Conditions may not need to be performed depending on fault location. It’s up to you to decide which are necessary for your particular problem. Now you’re ready to begin troubleshooting. Look at the first block. Read Step 1. If the answer to the question “Is there output from EXTERNAL BINDING POSTS sockets?” is YES, follow the YES arrow to the next box. Read Step 1 in that box. If the answer to the question "Is there output from TENT INTERFACE PANEL sockets?” is YES, follow the YES arrow to the next box. Follow the same procedure for each box. If you reach the second to last box on the page and the answer to the question “Is there output from RF jacks J119, J120, J121, and/or J122?” is NO, follow the NO arrow to reference GY. Then go to the page indicated. 0005 00-5