TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 401 of 788
INSTALL PERSONNEL HEATER KIT (M1064 ONLY) — Continued 42. Remove two screws (1) and control box (2) from control box case (3). 43. Remove two screws, nuts, and washers supplied with control box case (3). Discard screws, nuts, and washers. 44. Secure control box case (3) to two weldnuts (4) with two lockwashers (5) and screws (6). 45. Secure control box (2) to control box case (3) with two screws (1). 46. Clean small area on transverse beam next to control box (2) and apply warning decal (see your -20). 47. Thread personnel heater wiring harness (1) through transverse beam from driver’s compartment into personnel compartment. 48. Connect wiring harness (1) to personnel heater (2). 0056 00-9 0056 00 TM 9-2350-261-34