TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 388 of 788
TM 9-2350-261-34 INSTALL PERSONNEL HEATER KIT (M113A2 AND M1059 ONLY) — Continued 0055 00 WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. 49. Apply sealant to clean external tapered threads of elbow (1). Install elbow (1) in valve (2), adapter (3), and new packing (4) in port 1 of fuel filter (5). 50. Install elbow (6) on elbow (7) on engine compartment bulkhead. 51. Connect inlet fuel hose (8) to elbow (1) and elbow (6). 52. Install two plugs (9) and new packings (10) in ports 2 and 3 of fuel filter (5). 53. Install elbow (11) and new packing (12) in port 4 of fuel filter (5). WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. 54. Apply sealant to clean external threads of fittings. Install nipple (13) in personnel heater and install elbow (14) on nipple with elbow facing down. 0055 00-10 48. Install valve (2) on adapter (3) with valve kno b on top.