TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 385 of 788
TM 9-2350-261-34 INSTALL PERSONNEL HEATER KIT (M113A2 AND M1059 ONLY) — Continued 0055 00 27. Secure fuel pump (1) to threaded bracket (2) with four lockwashers (3), two flat washers (4), and screw (5). C A U T I O N Shielded lead can damage pump. Shielded lead must not contact pump body or other surfaces. 28. Secure shielded lead (6) to weldnut (7) with washer (8), two lockwashers (9), and screw (10). 29. Clean external pipe threads of fittings with solvent, cleaning compound. WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. 30. Apply a thin, even coat of primer and then sealing compound to cleaned external pipe threads of fittings. Do not apply primer or sealing compound beyond small end of threads. 0055 00-7