TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 384 of 788
TM 9-2350-261-34 INSTALL PERSONNEL HEATER KIT (M113A2 AND M1059 ONLY) — Continued 0055 00 21. Install elbow (15) in heater intake pipe (12) and intake elbow (16). 22. Align inlet elbow (15) with intake elbow (16), and align exhaust pipe (14) with exhaust pipe in carrier. Place heater (2) and shield (17) against saddles (5). 23. While still supporting heater, double check for proper mating of heater exhaust port (14) and exhaust pipe in carrier. Tighten two saddle clamps (10). NOTE Heater Model A-20 has ground strap attached to top of heater. 24. Position ground strap (8) on heater (2) and secure with one lockwasher (18) and screw (19). Discard existing screw and use kit screw. 25. Tighten clamp (13) on heater exhaust pipe (14) and exhaust pipe in carrier. 26. Tighten clamp (11) on heater intake pipe (12). 0055 00-6