TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 364 of 788
REPAIR/REPLACE ACCELERATOR STOP SUPPORT ASSEMBLY — Continued DISASSEMBLY 1. Remove screw (2) and nut (3) from support assembly (4). NOTE To replace nut (1) only, go directly to Step 5. 2. Remove broken support assembly (4) from floor plate. Discard broken support assembly. WARNING Metal chips and grinding dust can cause eye injury. Wear goggles and gloves. 3. Use a machinist’s hammer and a cold chisel to chip off remaining part of bad support assembly from floor plate. 4. Use a disc sander to sand chipped area smooth and remove hard coating from weld area. 5. Use a machinist’s hammer and a cold chisel to remove two rivets (5) securing nut (1) to support. Remove nut. 0052 00-2 0052 00 TM 9-2350-261-34