TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 349 of 788
TM 9-2350-261-34 REPAIR COMMANDER’S HATCH COVER HULL HINGES (M577A2 AND M1068 ONLY) — Continued 0048 00 3. Check alignment of hinges (1), (2), or (3) on cover with torsion bar shields and hinges on hull. 4. Remove cover. Weld hinges to hull. See TC 9-237. Use electrode type 5356. 5. Clean weld area and apply touch-up paint to repaired area. See TM 43-0139. FOLLOW-THROUGH STEPS 1. Install commander’s hatch cover on carrier (see your -20). 2. Connect battery ground strap (see your -20). 3. Connect personnel heater wiring harness (see your -20). END OF TASK 0048 00-3/4 blank