TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 334 of 788
TM 9-2350-261-34 REPAIR CARGO HATCH HINGE (M113A2, M1059, AND M901A1 ONLY) — Continued 0044 00 4. Remove rubber seal (1) from hinge edge of hatch (2). ASSEMBLY NOTE All weld joints should be metal to metal fit. In no case should weld gap exceed 3/32 inch or one half the thickness of thinner member, whichever is less. 1. Clamp or tack weld new hinge (3) or (4) on hatch (2). 2. Make sure hinges are aligned and spaced as shown. 0044 00-2