TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 331 of 788
TM 9-2350-261-34 REPLACE/REPAIR DRIVER’S LEVEL INDICATOR (M901A1 ONLY) — Continued 0043 00 NOTE Make sure tags are removed from leads before installing. 5. Solder three tagged electrical leads (4) on indicator switch (5) on indicator bracket (3) 6. Install driver’s level indicator bracket assembly (3) on bulkhead with four new lockwashers (2) and screws (1). ADJUSTMENT 1. Set up clinometer on top deck to the right of turret, and adjust to read side-to-side tilt. 2. Note the reading on the clinometer. 3. Loosen two adjustment screws (20) on driver’s level indicator (21). Adjust level indicator to read the same as the clinometer. 4. Tighten adjustment screws (20) then recheck driver’s level indicator (21) with clinometer. END OF TASK 0043 00-3/4 blank