Sign up to sell your inventory with NSN Lookup

TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download

Page 327 of 788

TM 9-2350-261-34 REPAIR DRIVER’S HATCH COVER HULL HINGES — Continued 0042 00 ASSEMBLY 1. Clamp or tack weld new hinge (1) or (2) on mounting ring (3). Set cover on mounting ring. Check alignment of cover hinges with hinges of ring (3). 2. Insert spring shield (4) through hinges (1) or (2) and cover hinges (5), (6), and (7). Seat shield in cover hinge (7). 3. Make sure hinges (1) or (2) are aligned and spaced as shown. 4. Weld hinge (1) or (2) to mounting ring (3) and hull. See TC 9-237. Use electrode type 5356. 5. Clean the weld area and apply touch-up paint to repaired area. See TM 43-0139. FOLLOW-THROUGH STEPS 1. Install driver’s hatch cover (see your -20). 2. Reconnect battery ground (see your -20). END OF TASK 0042 00-3/4 blank