TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 324 of 788
TM 9-2350-261-34 REPAIR DRIVER’S HATCH COVER HINGES — Continued 0041 00 ASSEMBLY 1. Clamp or tack weld new hinge (1), (2), or (3) on hatch cover (4). Check alignment of cover hinges with hinges on hull. 2. Insert spring shield (5) through hinges (3) or (2). Seat shield in hinge (1). 3. Make sure hinges are aligned and spaced as shown. 4. Weld hinge (1), (2), or (3) to hatch cover (4). See TC 9-237. Use electrode type 5356. 5. Clean the weld area and apply touch-up paint to repaired area. See TM 43-0139. FOLLOW-THROUGH STEPS 1. Install driver’s hatch cover (see your -20). 2. Reconnect battery ground (see your -20). END OF TASK 0041 00-2