TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 299 of 788
TM 9-2350-261-34 REPAIR MULTIPIN CONNECTORS — Continued 0034 00 5. Remove grommet (4) and retaining nut (1) from cable (3). INSTALL CABLE CONNECTOR NOTE If replacing lead, cut new wire from bulk supply. Measure original length, gauge, and type of wire. 1. Strip insulation from leads of cable (3) to uncover just enough wire to fill well in contact (5). 2. Slide retaining nut (1) and coupling nut (6) on cable (3). NOTE Make sure leads pass through proper lettered hole in grommet. 3. Push leads of cable (3) through grommet (4) and insert in new contacts (5). 4. Solder leads in contacts (5) and press contacts into grommet (4). Check leads for resistance. 5. Align and install grommet (4) in plug (2). Secure with retaining nut (1). END OF TASK 0034 00-3/4 blank