Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download

Page 293 of 788

TM 9-2350-261-34 REPLACE CHASSIS TURRET WIRING HARNESS (M901A1 ONLY) — Continued 0033 00 17. Position plate (17) and gasket (18) on hole on outside of hull. Secure with four screws (14), new lockwashers (15), and washers (16). WARNING To prevent injury to personnel, verify that all grenades have been removed from smoke grenade discharger before removing components. 18. Hold left smoke grenade wiring harness connector (5) up to plate (17) and secure with jamnut (13). Have helper assist. 19. Connect wiring harness (5) to hull connector (12). 20. Install mounting base (4) on hull. Pass the loose end of the wiring harness (5) through the opening in the base (4). Secure with three screws (10) and washers (11). 21. Install brush guard (9) on hull. Secure with four screws (6), new lockwashers (7), and washers (8). 22. Position smoke grenade discharger (3) and connect wiring harness (5) to connector on discharger. 23. Install discharger (3) on mounting base (4) and secure with three washers (2) and screws (1). 0033 00-11