Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download

Page 290 of 788

TM 9-2350-261-34 REPLACE CHASSIS TURRET WIRING HARNESS (M901A1 ONLY) — Continued 0033 00 NOTE Make sure to secure all wiring harness clamps loosened during removal procedure. 8. Position guards (1) and (2) over rear section of wiring harness (3) near fuel tank. Secure guards with two screws (4), washers (5), and new locknuts (6). 9. Take proper amount of slack out of wiring harness (3) and secure to guard (2) with three clamps (7), screws (8), and new locknuts (9). 10. Attach guard (2) to fuel tank and weldnuts with two screws (10) and new lockwashers (11). 11. Attach wiring harness (3) to front of fuel tank and left bulkhead using seven clips (12). 12. Attach wiring harness (3) to bulkhead using two clamps (13), washers (14), new lockwashers (15), and screws (16). 13. Secure wiring harness (3) to overhead with eleven clamps (17), screws (18), new lockwashers (19), and washers (20). 0033 00-8