TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 287 of 788
TM 9-2350-261-34 REPLACE CHASSIS TURRET WIRING HARNESS (M901A1 ONLY) — Continued 0033 00 20. Remove four screws (1), lockwashers (2), washers (3), and cable guard (4) securing connector W8 J1 (5) to floor near bulkhead. Disconnect connector W8 J1 (5) from turret slip ring wiring harness. Discard lockwashers. 21. Cut safety wire securing connector W8 J1 (5) to screw (6). Remove screw (6), three screws (7), four lockwashers (8), eight washers (9), four nuts (10), and connector W8 J1 (5) from bracket (11). Discard lockwashers. 22. Remove two screws (12), lockwashers (13), washers (14), clamps (15), and wiring harness (16) from left bulkhead. Discard lockwashers. 23. Remove screw (17), lockwasher (18), washer (19), and clamp (20) securing smoke grenade arming/firing unit lead W8 P1 (21) to rear engine compartment bulkhead. Discard lockwasher. 24. Disconnect wiring harness lead W8 P1 (21) from smoke grenade arming/firing unit connector (22). 0033 00-5