TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 284 of 788
TM 9-2350-261-34 REPLACE CHASSIS TURRET WIRING HARNESS (M901A1 ONLY) — Continued 0033 00 WARNING To prevent injury to personnel, verify that all grenades have been removed from smoke grenade discharger before removing components. 4. Remove three screws (1) and washers (2) securing smoke grenade discharger (3) to mounting base (4). Pull away discharger and disconnect wiring harness (5). Remove discharger. 5. Remove four screws (6), lockwashers (7), and washers (8) securing brush guard (9) to hull. Remove brush guard. Discard lockwashers. 6. Remove three screws (10), washers (11), and mounting base (4) from hull. 7. Disconnect wiring harness (5) from hull connector (12). Remove wiring harness. 8. Remove jamnut (13) from connector (12) in hull. Let connector fall inside driver’s compartment. 9. Remove four screws (14), lockwashers (15), washers (16), mounting plate (17), and gasket (18). Discard lockwashers. 0033 00-2