TM-9-2350-261-34 Direct and General Maintenance Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 276 of 788
TM 9-2350-261-34 REPLACE FRONT MAIN WIRING HARNESS — Continued 0032 00 26. Inside driver’s compartment, install front main wiring harness (2) on two cradles (10). Secure with two cradle clips (3). C A U T I O N Equipment may be damaged if ground strap is not connected to the 200 AMP regulator. NOTE If v oltag e reg ulator was rem oved in R EMO VAL Step 28, do INSTAL LATIO N Steps 27 - 28 . Otherwise, go to INSTALLATION Step 29. 27. 200 amp regulator only. Install ground strap (6) on regulator. Secure with lockwasher (8) and nut (9). 28. Install voltage regulator (1) on four weldnuts (7). Secure with eight new lockwashers (5) and four screws (4). 29. Connect two connectors (11) to regulator (1). 0032 00-18